My 2L (0.5g) Marina air bubbler breeder box came in today, so I set it up with a $5.98 pot of "golden pothos" from Lowes. My original intent was to set it up on my goldfish's 55g, but this breeder box fits the rim of my 75g no problem. The frame thickness is just shy of 1.5", so it looks like this large size breeder box will fit up to 1.5" tank frames with no problem. This thing moves quite a bit of water. It filled itself in just a few minutes.
I rinsed the plant and roots real well and cut the roots back about 2" before placing it in the breeder box. I'm not sure if this is going to be too much sunlight for the plant and roots, so it's a trial and error thing for me. This southern facing window gets some direct sunlight when the trees are bare.
I had also purchased these plastic trays and suction cups from the dollar store to try out, so I suction cupped one to the rear of the lower 55g and put a clump of golden pothos in there as well. We'll see how it goes..
I rinsed the plant and roots real well and cut the roots back about 2" before placing it in the breeder box. I'm not sure if this is going to be too much sunlight for the plant and roots, so it's a trial and error thing for me. This southern facing window gets some direct sunlight when the trees are bare.
I had also purchased these plastic trays and suction cups from the dollar store to try out, so I suction cupped one to the rear of the lower 55g and put a clump of golden pothos in there as well. We'll see how it goes..
